24'' 600LB Top Entry Ball Valve Carbon Steel Valve Body Material WCB
Product Description
Top Entry Ball Valve can be used as shut-off valve,with the characteristics of safety and reliability.
Product Range
Size Range
|
NPS 2 to NPS 30 |
Class Range
|
50LB to 2500LB |
End Connection
|
RF,RTJ flange,butt-welded,thread,socket welded |
Operation
|
Manual,Pneumatic,Electric,Gas-liquid interaction etc. |
Working Principle
The bottom of the ball valve has a ball supported by a trunnion. When the hole is aligned with the conduit,
the valve is open, allowing fluid to flow in. The rod starts to go down and it rotates 90° due to the channel
machined on it, causing the ball to rotate the same. Then some channels are machined straight and the stems
cannot go straight down.
In this case, due to the angled surface, the stem drives the ball to the bottom trunnion and seat. The ball hits the
seat only in this position, there is no pressure in the rest of the movement.
Company Profile
We have a 15,400 m² workshop and a technology research and development center.The company has 137 employees,
10 engineers, and 17 technicians,12 qualified welders with certificate, 11 non-destructive testing personnel have level Ⅱ
certificate(RT, UT, MT, PT).
Factory Equipment
Valves Display Area
Radial Drilling Lathe
Finish Machining Workshop
Pressure Test and Assembly Workshop
Pressure Test Area
Painting and Finished Products